Specifications

5-12
122996-163 Operator Manual Routine Maintenance
5.4.5 Replace Shear Pin on
Torque Limiter
See Figures 5-8 and 5-9.
1. Lock electrical disconnect switch in OFF position.
2. Remove driving chain cover (see Figure 5-8).
3. Remove broken shear pin parts from torque limiter and sprocket
using a suitable tool.
4. Align shear pin hole located in torque limiter with hole located in
sprocket.
5. Insert new shear pin inside hole using an Allen key.
6. Reinstall driving chain cover.
7. Unlock electrical disconnect switch and position to ON.
WARNING–PERSONAL INJURY
AND/OR EQUIPMENT DAMAGE
HAZARD: Repairs and adjust-
ments to this equipment must
be made only by STERIS or
STERIS-trained service person-
nel. Non-routine maintenance
performed by unqualified per-
sonnel or installation of unau-
thorized parts could cause
personal injury, result in
improper equipment perfor-
mance, void the warranty or
result in costly damage. Con-
tact STERIS regarding service
options.
WARNING–ELECTRIC SHOCK
AND/OR BURN HAZARD:
Disconnect all utilities to dis-
penser before servicing. Do
not service dispenser unless
all utilities have been properly
locked out. Always follow local
lockout-tagout and electrical
safety-related work practice
standards.
Figure 5-9. Replace Shear Pin on Torque Limiter
Shear Pin
Torque Limiter