Specifications

5-8
122996-163 Operator Manual Routine Maintenance
5.4 Weekly
Maintenance
5.4.1 Verify Gearbox Oil
Level
See Figures 5-1 and 5-5.
1. Lock electrical disconnect switch in OFF position.
2. Locate gearbox at top left side of unit, viewed from load side
(see Figure 5-1).
3. On right side of gearbox, loosen gearbox top oil level plug. Do
not remove plug (see Figure 5-5).
4. Oil should drip from hole. If not, add good quality gearbox oil as
necessary.
NOTE: See Table 5-2 for list of approved lubricants.
5. Retighten plug.
6. Unlock electrical disconnect switch and position to ON.
WARNING–ELECTRIC SHOCK
AND/OR BURN HAZARD:
Disconnect all utilities to dis-
penser before servicing. Do
not service dispenser unless
all utilities have been properly
locked out. Always follow local
lockout-tagout and electrical
safety-related work practice
standards.
Oil Level Plug
Gearbox
Figure 5-5. Verify Gearbox Oil Level
Table 5-2. Approved Lubricants For Gearboxes
Manufacturer Worm Gears
AGMA #7 Compounded
Spur, Bevel, Helical
AGMA #4 EP
Chevron Oil Co. Cylinder Oil 460X NL Gear Compound #150
Exxon Oil Co. Cylesstic TK 460 Spartan EP 150
Gulf Oil Co. Transgear EP 460 EP Lubricant HO 150
Mobil Oil Co. 600 W Cylinder Oil Mobilgear 629
Shell Oil Co. Valvata J460 Omala 150
Sun Oil Co. Gear Oil 7C Suneo 1060
Texaco Inc.
Vanguard Cylinder
Oil 460
Meropa 150