Specifications

5-6
122996-163 Operator Manual Routine Maintenance
5.3.2 Empty Dust Collection
System Bag
See Figure 5-4.
Empty dust collection bag as follows:
1. Lock electrical disconnect switch in OFF position.
2. Remove clamp holding dust collection bag in position.
3. Empty bag.
4. Reinstall bag using previously removed clamp.
5. Unlock electrical disconnect switch and position to ON.
WARNING–ELECTRIC SHOCK
AND/OR BURN HAZARD:
Disconnect all utilities to dis-
penser before servicing. Do
not service dispenser unless
all utilities have been properly
locked out. Always follow local
lockout-tagout and electrical
safety-related work practice
standards.
Figure 5-4. Empty Dust Collection Bag
Dust Collection Bag
Bag
Clamp