Specifications

5
5-1
Routine Maintenance Operator Manual 122996-163
ROUTINE MAINTENANCE
5.1 General
Information
Procedures described in this section should be performed at regular
intervals as indicated.
Due to local conditions (air quality, amount of usage), more frequent
maintenance than indicated may be required. Customer should
maintain a record of all maintenance procedures performed on the
Basil
®
3600 Bedding Dispenser.
Should a problem occur, refer to S
ECTION 6, TROUBLESHOOTING.
Refer to S
ECTION 7, REPLACEMENT PARTS AND PRODUCTS, for replace-
ment parts list.
NOTE: Never permit unqualified persons to service the bedding dis-
penser.
IMPORTANT: A listing of the Safety Precautions to be observed when operating and servicing this bedding
dispenser can be found in S
ECTION 1 of this manual. Do not operate the equipment until you have become
familiar with this information.
WARNING–PERSONAL INJURY
AND/OR EQUIPMENT DAMAGE
HAZARD: Regularly scheduled
preventive maintenance is
required for safe and reliable
operation of this equipment.
Contact STERIS to schedule
preventive maintenance.
WARNING–ELECTRIC SHOCK
AND/OR BURN HAZARD:
• Disconnect all utilities to
dispenser before servicing.
Do not service dispenser
unless all utilities have been
properly locked out. Always
follow local lockout-tagout
and electrical safety-related
work practice standards.
• Fasteners and star washers
are used to ensure protective
bonding continuity. Always
reinstall any star washer
which may have been
removed during installation
or servicing.