Specifications

2-2
122996-163 Operator Manual Installation Verification
2.3 Technical
Specifications
These specifications are intended to describe the technical informa-
tion given on the bedding dispenser identification nameplate and to
state other relevant information. Verify equipment drawing (122-998-
267 or 122-998-283) or identification nameplate, located in chemical
storage compartment, for proper voltage and amperage.
2.3.1 Voltage, Amperage and
Power Consumption
The Basil 3600 Bedding Dispenser operates on:
• 208 V, 60 Hz, three-phase, neutral, four-wire
• 480 V, 60 Hz, three-phase, three-wire
Maximum current and power consumptions are:
Refer to Uncrating/Installation Instructions (P122997-217) for proper
connection.
2.3.2 Permissible
Environmental Conditions
This equipment is designed to give optimal results in an environment
where maximum relative humidity is 80% for temperatures up to 88ºF
(31ºC) decreasing linearly to 50% relative humidity at 104ºF (40ºC).
2.3.3 Seismic Anchorage
System
A seismic anchorage system is available for high-risk seismic zones.
Amp kW
• 208 V
13.9 2.6
• 480 V
5.6 2.7