User Manual

MCP Series
Brushed DC Motor Controllers
MCP Series User Manual
31
1. When a new version of rmware is shown click the update button (3) to start the process.
2. Ion Studio will begin to update the rmware. While the rmware update is in progress the
onboard LEDs will begin to ash. The onboard ash memory will rst be erased. It is important
power is not lost during this process or the motor controller will no longer function. There is no
recovery if power fails during the erase process.
3. Once the rmware update is complete the motor controller will reset. Click the "Connect
Selected Unit" button to re-connect.