User Manual

RoboClaw Series
Brushed DC Motor Controllers
RoboClaw Series User Manual
26
BASICMICRO
Firmware Updates
Motion Studio Setup
Download and install the Motion Studio application. Win7 or newer is required. When opening
Motion Studio, it will check for updates and search for a USB Windows Driver to verify
installation. If the USB driver is not found, Ion Studio will install it.
1. Open the Motion Studio application.
2. Apply a reliable power source such as a fully charge battery to power the motor controller.
3. Connect the powered motor controller to a USB port on your computer with Motion Studio
already open.
Firmware Update
Once Motion Studio detects the motor controller it will display the current rmware version in
the Firmware Version eld (1). Each time Motion Studio is started it will check for a new version
of its self which will always include new rmware. If an update is required Motion Studio will
download the latest version and display it in the rmware available eld (2).
1
2
3