Datasheet
RoboClaw 2x30A Dual Channel Motor Controller Data Sheet
(c) 2020 Basicmicro. All Rights Reserved.
10. To complete the setup for RC mode click Device in the menu at the top of the application and then click on Write
Settings. The settings are now saved to the Solo.
11. Disconnect the Solo from Motion Studio by clicking Disconnect Selected Unit in the upper left-hand side of the
application. The USB connection can then be removed from the Solo.
12. The robot or other system can now be operated remotely with the RC transmitter.
Additional Control Modes and Documentation
The RoboClaw Solo also features other control modes such as packet serial, simple serial and analog. Documentation for
these mode’s wiring and software conguration can be found in the User Manual as well as our Application Notes.
The User Manual can be found here: https://www.basicmicro.com/downloads
Application Notes can be found on our website: https://resources.basicmicro.com/