Service manual

GF Health Products, Inc. - www.grahamfield.com Zenith 7000 Service Manual 999-0843-190B-APRIL 2013

Zenith SeRieS

REPLACEMENT OF 9V BATTERY & OPTIONAL

BATTERY BACKUP CHARGER AND BATTERY PACK

REPLACING YOUR INTERNAL 9V BATTERY:

1. Remove battery cover on the underside of your

control box by unscrewing the two phillips screws

as shown.

2. Remove the existing battery connected to the

Connector Cable from the battery slot.

3. Unplug the existing battery and discard. Plug

in the new battery to the Connector Cable and

reinsert into slot. Replace battery cover.

NOTE: THE 9V BATTERY INCLUDED WITH YOUR CONTROL BOX IS ONLY GOOD FOR

ONE CHARGE - LOWERING THE BED ONCE IN THE EVENT OF A POWER OUTAGE. YOU

WILL NEED TO REPLACE AFTER EACH SINGLE USAGE. A STRONGER BATTERY PACK IS

AVAILABLE AS A SEPARATE PURCHASE. PLEASE ORDER WITH BACKUP CHARGER.

Battery Charger

Adaptor Cable

Plugs directly

into “optional”

ILCOCHARGE

Backup Battery

and Battery

Pack purchased

separately.

To plug in battery charger,

first remove the protective

cap with small screwdriver.