Service manual
NOTE: THE 9V BATTERY INCLUDED WITH YOUR CONTROL BOX IS ONLY GOOD FOR
ONE LOWERING AND FLATTENING OF THE BED IN THE EVENT OF A POWER OUTAGE.
YOU WILL NEED TO REPLACE IT AFTER EACH SINGLE USE. A STRONGER BATTERY PACK
IS AVAILABLE AS A SEPARATE PURCHASE. ORDER WITH BACKUP CHARGER.
Battery Charger
Adaptor Cable
Plugs directly
into optional
ILCOCHARGE
Backup Battery
and Battery
Pack purchased
separately.
To plug in battery charger,
first remove the protective
cap with small screwdriver.
REPLACEMENT OF 9V BATTERY AND OPTIONAL
BATTERY BACKUP CHARGER AND BATTERY PACK
REPLACING YOUR INTERNAL 9V BATTERY:
1. Remove battery cover on the underside of your
control box by unscrewing the two Phillips screws as
shown.
2. Remove the existing battery connected to the
Connector Cable from the battery slot.
3. Unplug the existing battery and discard. Plug in the
new battery to the Connector Cable and reinsert into
slot. Replace battery cover.
GF Health Products, Inc. - www.grahamî‚żeld.com Zenith 7000 Service Manual 999-0843-190E
ZENITH SERIES
24