Service manual

SERVICE/REPLACEMENT PART DIAGRAM - ELECTRONICS
POWER CORD
PLUG AT HEAD END
FOOT/KNEE
MOTOR
LONGER SIDE OF T-CABLE
WITH PUSH CABLE TIE IN
SMALL HOLE AND CAP
CONTROL BOX
END OF BLACK
CONTROL CABLE
(BLACK)
FOOT-END
OF T-CABLE
(WHITE)
LONG “T” OF T-CABLE
SECURED TO ROD
AND MAIN FRAME
BRACKET WITH
CABLE TIES
HEAD
MOTOR
POWER CABLE SECURED TO ROD
WITH CABLE TIES
SHORTER SIDE OF T-CABLE WITH
PUSH CABLE TIE IN SMALL HOLE
CABLE PROTECTION GROMMET
IN SEAT PAN KEY HOLE
HEAD-END
HI/LO MOTOR
FOOT-END
HI/LO MOTOR
HEAD
END
FOOT
END
WHEN ORDERING REPLACEMENT PARTS FROM CUSTOMER SERVICE,
HAVE THE BED SERIAL NUMBER AVAILABLE TO CONFIRM
WHETHER THE PART IS COVERED UNDER WARRANTY.
(SEE PAGE 18 FOR LOCATION OF SERIAL NUMBER ID LABEL.)
1. TO ORDER A REPLACEMENT
HI/LO MOTOR USE SERVICE PACK
999-0843-251SP (Includes motor,
mounting hardware, and installation
instruction sheet).
2. TO ORDER A REPLACEMENT
HEAD MOTOR USE SERVICE PACK
999-0844-052SP (Includes motor,
mounting hardware, and installation
instruction sheet).
3. TO ORDER A REPLACEMENT
FOOT MOTOR USE SERVICE PACK
999-0844-053SP (Includes motor,
mounting hardware, and installation
instruction sheet).
TO ORDER A REPLACEMENT
CONTROL BOX USE PART NO.
999-0844-300SP (Includes control
box, detachable power cord, control
cable, ground wire screw, cable ties,
and installation instruction sheet).
TO ORDER A REPLACEMENT
SINGLE T-CABLE USE SERVICE
PACK 999-0844-201SP (Includes
T-Cable, cable ties, grommets, and
installation instruction sheet).
TO ORDER A REPLACEMENT
CONTROL CABLE USE PART NO.
999-0844-200SP (Includes cable,
two cable ties, and installation
instruction sheet).
GF Health Products, Inc. - www.grahameld.com Zenith 7000 Service Manual 999-0843-190E
ZENITH SERIES
23