Service manual

The Hand Control
Pendant Holster
999-0791-000SP
comes standard
with the Zenith
7000 bed.
The Hand
Control
Pendant
Cable has
a phone jack
connector.
HAND CONTROL PENDANT
The Zenith 7000 bed comes with
Alligator Clip attached to Hand
Control Pendant Cable.
To order a replacement Hand
Control Pendant, see page 21.
HAND CONTROL PENDANT OPERATION
1 HEAD DECK ANGLE UP BUTTON
2 HEAD DECK ANGLE DOWN BUTTON
3 HI/LO UP BUTTON (RAISE ENTIRE BED)
4 HI/LO DOWN BUTTON (LOWER ENTIRE BED)
5 KNEE AND FOOT DECK ANGLE UP BUTTON
6 KNEE AND FOOT DECK ANGLE DOWN BUTTON
1
3
5
6
4
2
HAND CONTROL PENDANT OPERATION
The Hand Control Pendant comes standard on the Zenith 7000 series and can
be plugged into either side of the bed. The plug features a lock-on cap.
A pendant holster for attaching to optional
assist devices is also provided.
NOTE:
THE ZENITH 7000 HAND CONTROL PENDANT CAN BE PLUGGED INTO THE T-CABLE PLUGS ON EITHER SIDE OF
THE BED FOR EASY ACCESS. THE OPPOSITE SIDE OF THE T-CABLE SHOULD ALWAYS HAVE THE PROVIDED
CAP ATTACHED FOR SAFETY.
IN ORDER TO MAXIMIZE THE EASE OF USE AS WELL AS MAINTAIN THE LONGEVITY OF THE ZENITH 7000 BED,
THE MICROPROCESSOR-CONTROLLED CONTROL SYSTEM MONITORS ALL HAND CONTROL PENDANT INPUTS.
THE HAND CONTROL PENDANT IS INTENDED FOR USE BY THE PATIENT TO MAXIMIZE COMFORT OR BY THE
CAREGIVER FOR REPOSITIONING.
TO DETER MISUSE BY A PATIENT, IF THE SYSTEM DETECTS REPEATED BUTTON OPERATIONS, IT WILL BLOCK
THE NEXT SIGNALS TO ENSURE THE WELLBEING OF THE PATIENT AND TO PROTECT THE SYSTEM. SHOULD
THIS OCCUR, THE USER WILL NOTICE A TWO (2) SECOND DELAY WHEN DEPRESSING A FUNCTION, OR MUST
WAIT FOR TWO SECONDS BEFORE OPERATING THE BED AGAIN.
GF Health Products, Inc. - www.grahameld.com Zenith 7000 Service Manual 999-0843-190E
ZENITH SERIES
13