User`s guide

BaseWall, Tel: [phone], Fax: [phone]
61
Management Asssistant – Syslog
This feature can send real time system information on the web page or to the specified PC.
Syslog Delivery
• Sending out – Check this, if you want to send syslog messages to other machine.
• Keep Send messages – Check this, if you want to keep sent messages, otherwise the
sent message will be delete.
• Syslog Server - IP address: Up to 3 syslog servers can be used.
• Enable: You can enable or disable each server temporarily.
• Port: If your syslog does not use the default port, change it.
• Log Priority for modules - The messages are grouped into 8 priority levels, from
Emergency to Debug. The lower level it is, the fewer messages it will generate.
Emergency is the lowest priority level, and Debug is the highest one. So set priority to
Debug will send all generated messages.
SNTP Configuration
• Time Zone - You can setup system up time using SNTP ( Simple Network Time Protocol),
and there are 3 SNTP server that you can define on the SNTP configuration.