User`s guide

BaseWall, Tel: +31-74-2491004, Fax: +31-74-2593934

PPPoE

The screen is required in order to use multiple PPPoE sessions on the same WAN port. It

can also be used to manually connect or disconnect a PPPoE session.

Advanced WAN – PPPoE

Select WAN port & Session

WAN Port – Selected WAN port only using PPPoE connection

PPPoE Session – Usually ISP provides multiple floating real IP for PPPoE. Each WAN

port can have up to 8 PPPoE sessions with different IP address, if your WAN port is

using PPPoE connection.

PPPoE Session MTU – The Maximum Transfer Unit for PPPoE packet data. Leave it

as default, unless the

ISP provides different PPPoE packets data size. The default value of MTU is 1492

bytes.

WAN IP Account

• User Name – Enter the PPPoE user name assigned by your ISP.

• Password – Enter the PPPoE password assigned by your ISP.

• Verify Password – Re-enter the PPPoE password assigned by your ISP.