User manual

- BaseWall VPN 6000 user manual -
For both directions you'll have to specify a upper limit and a lower limit. The
upper limit prevents traffic to and from this route to receive a higher bandwidth
that specified. The lower limit guarantees a minimum available bandwidth for
this traffic. It's impossible to guarantee more bandwidth that 100% on all your
routes.
19.4 Groups of routes
When the configuration of the firewall consists of a large amount of routes, the
presentation of the network in the “Netview” gets pretty large. This is
especially undesirable when many routes serve a similar purpose.
Therefor it's possible to create a group of routes. This group serves as a
container of similar routes and can be displayed in the “Netview” as a single
entity. Routes can only be combined into groups when they are on the same
network.
The group can have a common policy connected to it, but every sub-route
within the group can still get a more specific policy.
To add a group you'll have to provide a name for the group and select which
route the group will be attached to. After you added the group, you can edit the
routes you wish to add to the group, they will receive a pulldown menu in the
“group” column. This pulldown menu lists all possible groups for this route. If
the group you would like to select is missing the group is probably place in the
wrong network.
Page 75 / 79