User manual

- BaseWall VPN 6000 user manual -
left-hand side of the screen in the “Configuration” context.
The “Setup general VPN parameters” screen should appear.
The client PC's get an extra IP address for this connection. These addresses
should not double with any IP range of the internal network's of the firewall or
any networks connected to by IPSec tunnels. It is better to choose a base
number in the local network ranges like '192.168.100.1' or '10.100.0.1' so this
traffic will never by error be routed via the normal Internet connection.
➔ Fill in the base IP address of the VPN users.
➔ Click the “Next” button.
8.3 Managing PPTP/L2TP users
Now it is possible to add user names and passwords for employees to connect
to the network.
➔ Click the “Add new” button.
➔ Fill in a user name and a password.
➔ Click the “Next” button.
The first uses is now visible and gets automatically the next IP address higher
than the last given address. The base address is used by the BaseWall VPN
6000 side of the connections.
It is possible in this screen to remove users, edit their user name and password
again and add extra users.
Page 51 / 79