User manual

- BaseWall VPN 6000 user manual -
➔ Click the “Edit” button next to the line corresponding to the VPN IPSec tunnel
you wish to edit.
➔ Depending on the type of tunnel and authentication, modify the VPN IPSec
tunnel settings as if you created a new VPN IPSec tunnel (as described in
paragraphs 6.3 Adding a VPN IPSec tunnel to a remote network and 6.4
Adding a VPN IPSec tunnel to a single dynamic host).
After editing VPN IPSec tunnel, the screen will once again change to “List IPSec-
tunnels” (see above).
6.6 Deleting a VPN IPSec tunnel
To remove a VPN IPSec tunnel:
➔ Open the “List IPSec-tunnels” screen (as demonstrated in paragraph 6.2
Managing VPN IPSec tunnels).
➔ Click the “Remove” button next to the line corresponding to the VPN IPSec
tunnel you wish to delete.
➔ Click “OK” to confirm deletion of the VPN IPSec tunnel.
After deleting a VPN IPSec tunnel, the screen will once again change to “List
IPSec-tunnels” (see above). The deleted VPN IPSec tunnel should no longer be
displayed in the list of tunnels.
Page 48 / 79