User manual

- BaseWall VPN 6000 user manual -
6.4 Adding a VPN IPSec tunnel to a single dynamic host
To add a VPN IPSec tunnel to a remote network:
➔ From the “List IPSec-tunnels” screen, click the “Add new” button.
The “List IPSec-tunnels” screen should change tot the “Create IPSec-tunnel”
view.
➔ Choose the type of VPN IPSec tunnel you wish to configure. In this example
we will connect to a “Single dynamic host (roadwarrior)”.
➔ Choose the “authentication method” we will use for the VPN IPSec tunnel.
For security reasons your BaseWall VPN 6000 only supports “Certificate”
authentication with “Single dynamic host (roadwarrior)” tunnels.
➔ Click the “Next” button.
➔ The “Create IPSec-tunnel” screen will change.
➔ Choose the Internet connection that will be used for this VPN IPSec tunnel
(usually your “default” connection).
➔ Enter your certificate's asn1dn subject (if you have chosen to authenticate
with a security certificate).
➔ Click the “Next” button.
You should be taken back to the “List IPSec-tunnels” view.
6.5 Editing a VPN IPSec tunnel
To edit an existing VPN IPSec tunnel:
➔ Open the “List IPSec-tunnels” screen (as demonstrated in paragraph 6.2
Managing VPN IPSec tunnels).
Page 47 / 79