User manual

- BaseWall VPN 6000 user manual -
Setting up WAN1 using a PPTP or PPPoE connection
PPTP or PPPoE Internet connections are not identical, but since both require
user authentication, the options to enter are much the same.
➔ Enter the type of Internet connection (PPTP or PPPoE) after the text “Please
choose the type of connection”.
(in the example screen below, we use PPTP. Please remember that this
procedure also applies for PPPoE connections).
➔ Enter the user name and password provided by your ISP in the corresponding
fields.
If you do not know the correct type of connection, user name and/or password,
please contact your ISP for these details.
Some ISP's also require you request a specific IP address of gateway. If such is
the case, you can put these values in the optional IP address and gateway
fields. Most users may simply leave these fields empty.
➔ If required, fill in the “new IP address” and “new gateway” fields
➔ Press “next” to continue.
1.6.3 Setting up your fall back Internet connection
Next, you will be asked to set up your fall back Internet connection (WAN2).
Setting up a fall back Internet connection is much the same as setting up your
default connection (covered in the previous paragraph). Therefore we will not
include a detailed description here.
If you do not have a fall back Internet connection, or do not wish to use one,
please choose “DHCP” as the type of Internet connection for WAN2. Your
firewall will automatically detect the absence of a connection on WAN2 and will
not make use of this connection.
Page 22 / 79