User manual

- BaseWall VPN 6000 user manual -
➔ Now select the “TCP/IP” tab.
➔ Switch the “Configure” box to “Using DHCP”.
➔ Verify that the “IP address”, “Subnet Mask” and “Router” settings are as
shown (192.168.99.101, 255.255.255.0 and 192.168.99.99 respectively).
➔ Click “Apply Now” to confirm your changes.
1.4.2 Log in on the firewall management interface
➔ Open a web browser on the PC or Notebook you have just configured
➔ Enter the address “ https://192.168.99.99:12000”into the address bar.
➔ When prompted for a user name and password, enter “admin” (user name)
and “password” (as password).
➔ Click “OK”.
If you get a “timeout”, “not found” or “permission denied” error, please refer to
section 1.13 ( Errors and recovery).
Page 15 / 79