User manual

- BaseWall VPN 6000 user manual -
This should force the PC or Notebook to request a new network address. If you
still fail to get an “IP Address” in the correct range, please refer to section 1.13
( Errors and recovery).
Enabling DHCP using Mac OS
®
X
➔ From the Apple
®
menu, choose “System Preferences”, then “Network”.
The Network window should open.
➔ In the “Network” window, make sure the “Show” box is set to show “Active
Network Ports”.
➔ Drag “Built-in Ethernet” to the top of the list.
➔ Set the “Show” box to “Built-in Ethernet”.
Page 14 / 79