User manual

- BaseWall VPN 6000 user manual -
The “Internet Protocol (TCP/IP) Properties window should open.
➔ In the “Internet Protocol (TCP/IP) Properties” window, make sure settings are
as in the above example (“Obtain an IP address automatically” and “Obtain
DNS server address automatically”are selected).
➔ Press the “OK” button to confirm your new settings.
➔ To verify your settings, open a “Command Prompt” (From the “Start” menu,
through “All Programs”, in the “Accessories” sub menu).
➔ In the command prompt type:
ipconfig
The output should look like this:
➔ If the “IP Address” line does not list an address starting with 192.168.99,
please try typing:
ipconfig /renew
Page 13 / 79