User manual

- BaseWall VPN 6000 user manual -
The window “Internet Protocol (TCP/IP) Properties” should open.
➔ Make sure settings in this window are as specified in the example above
(check “Obtain an IP address automatically” and “Obtain DNS server address
automatically”.
➔ Click the “OK” button to confirm your changes.
➔ To verify your settings, open a “Command Prompt” (From the “Start” menu,
through “Programs”, in the “Accessories” sub menu).
➔ In the command prompt type:
ipconfig
The output should look like this:
Page 10 / 79