Specifications

Niagara Release 2.3
Revised: May 22, 2002 Niagara Networking & Connectivity Guide
Chapter 2 Configuration and Troubleshooting Tools
Niagara Configuration Tools
2–18
Figure 2-11 Sample system.properties file after FTP addition.
Step 5 From the system.properties menu, choose File > Close.
You are prompted to save any changes you made to the file.
Step 6 Click Yes to save your changes. Otherwise, click No to lose your changes. Clicking
Cancel returns you to the system.properties edit window.
Step 7 Reboot the JACE.
After booting, the JACE can be reached via FTP.
Use the following procedure to connect via a LAN to a JACE-4/5 using FTP from a
Windows host.
Procedure 2-11 Connecting to a JACE-4/5 using FTP.
Step 1 From the Start menu, choose Run.
Step 2 Type:
ftp <JACE-4/5>
where <JACE-4/5> is the name or IP address of the JACE you want to connect to.
You are connected to the JACE and see a command prompt similar to the following:
JACE login:
Step 3 Type the name of the host administrator account. This is the user used to log into the
JACE via the Admin Tool.
Step 4 Press ENTER.
You are prompted for a password.
Step 5 Type the password of the host administrator account.
Step 6 Press ENTER.
You are logged in to the JACE at the ftp> prompt.