Specifications
Table Of Contents
- About This Document
- Understanding Networking and IP Addressing
- Introduction to Networking
- Networking using IP
- Niagara Considerations
- Additional Information
- Configuration and Troubleshooting Tools
- Connecting on a LAN
- Connecting with Direct Dial
- Connecting to an ISP
- Using Security Technologies
- Configuration Files Used for Communication
- Glossary
- Index
Niagara Release 2.3
Revised: May 22, 2002 Niagara Networking & Connectivity Guide
Chapter 2 Configuration and Troubleshooting Tools
Niagara Configuration Tools
2–4
Note For a new JACE-NP, use the initial user name for the administrator account
and use the initial password. These are listed on the packing slip which
accompanies the unit. For many JACEs the initial user name is tridium and
the initial password is niagara.
Step 7
Click OK.
You are connected to the remote JACE-NP with a secure NetMeeting session (see
Figure 2-2). If you see the Windows NT 4.0 desktop, you are finished. Otherwise,
continue with the next step to log on to the desktop.
Figure 2-2 Target’s Desktop window.
Step 8
From the Target’s Desktop menu, select Control > Send Ctrl+Alt+Del.
An Unlock Workstation dialog box appears.
Figure 2-3 Unlock Workstation dialog box.