Specifications

Niagara Release 2.3
Revised: May 22, 2002 Niagara Networking & Connectivity Guide
Chapter 6 Using Security Technologies
Default Niagara Port Numbers
6–14
Figure 6-8 Changing the admin port in a niagarad.properties file.
Tip You can add comment lines to any Niagara text file with the use of preceding
# characters, as shown in Figure 6-8. It is a good idea to add comments about
any changes you make to a file in case you (or someone else) need to reverse
them later.
Step 7 From the menu, choose File > Save. The Save dialog box opens.
Step 8 Verify that you are still in the \nre\lib directory.
Step 9 If saving a previously created niagarad.properties file, click Save, and overwrite the
existing file. Otherwise, if saving a newly created file:
a. In the Save dialog box, change the Save as type list to All Files.
If you do not execute this step, your file saves with a .txt extension and the
system ignores it.
b. In the File name text box, type:
niagarad.properties
c. Click Save.
Step 10 Reboot the host to enable the change.
Step 11 Verify connectivity to the host by connecting to it using the Admin Tool. Be sure to
reference the new port number in the Connect to Host dialog box (see “Impact of
Changing Default Niagara Ports,” page 6-18).
Changing the Admin Port on a JACE-NP
Procedure 6-5 Changing port 3011 of a JACE-NP host.
Step 1 Access the desktop of the JACE-NP with either a keyboard, monitor and mouse
(Full) or NetMeeting (Embedded). For instructions on how to use NetMeeting, see
the “NetMeeting” section on page 2-2.
Step 2 Click Start > Run.
Step 3 In the text box, type:
notepad
The Windows Notepad application opens.