Specifications

Niagara Release 2.3
Revised: May 22, 2002 Niagara Networking & Connectivity Guide
Chapter 6 Using Security Technologies
Default Niagara Port Numbers
6–10
Figure 6-3 Menu navigation to change HTTP port.
Step 3 On the properties sheet, click the Config tab.
Step 4 Edit the httpPort text box, removing the default port of 80 and replacing it with your
chosen port number (such as 8081). See Figure 6-4.
Tip Many ports are assigned to other TCP/IP applications. To avoid a conflict, see
http://www.iana.org/assignments/port-numbers
for a full list of registered and
well known ports.
Figure 6-4 Config tab and httpPort text box with new port.
Step 5 Click Apply.
Step 6 Using the Admin Tool, stop and start the station (or reboot the host) and verify that
the station is running.
Your change is enabled in the station.
Step 7 Test the functionality of the new port by connecting to the station with a browser.
You must use the new port number in the URL. For example:
http://<hostname>:8081/
where <hostname> is the name or IP address of the host with the station you changed.
See also “Impact of Changing Default Niagara Ports,” page 6-18.