Specifications

Niagara Release 2.3
Revised: May 22, 2002 Niagara Networking & Connectivity Guide
Chapter 5 Connecting to an ISP
Configuring Captive ISP on the JACE-4/5
5–18
Installing and Configuring the Module
Use the following steps to install and configure the module and object:
Procedure 5-3 Installing and configuring the isp module and the ispConnection object.
Step 1 Install release 2.3 on your engineering workstation and the JACE.
Step 2 Configure and test captive ISP and DDNS (if required). Proceed only when working
correctly.
Step 3 Install the isp module, as follows:
a. From your engineering workstation, connect to and log into the JACE.
b. Click the Installation tab.
c. Click Installation Wizard. You see the Select Distribution Directory dialog
box.
d. Browse to the location of the distribution installation files and click the emb
folder. You may have copied these files to your hard drive, or you can find them
on the Web Supervisor installation CD.
e. Click Install.
f. On the Niagara Remote Installation window, click Configure Modules Only
and click Next. The Configure Modules dialog box opens.
g. Scroll down the list of modules to install and click in the Upgrade/Add column
of the isp module. The module is marked for addition with a check mark.
h. Click Next.
i. Choose to backup the database by supplying the administrator name and
password, and click Next. The Niagara license window opens.
j. Click Finish.
Step 4 Copy the ispConnection object from the local library to the station, as follows:
a. In the tree view of the JDE, open the local library.
b. In the local library, locate the ispConnection object in the tridiumx\isp\objects
directory.
c. Copy the object and paste it into the root or into a container on the JACE.
Tip If the JACE reboots and the object is not on the JACE, verify that the isp
module is installed.
Step 5 Configure the ispConnection object as described previously and test functionality.