Specifications
Table Of Contents
- About This Document
- Understanding Networking and IP Addressing
- Introduction to Networking
- Networking using IP
- Niagara Considerations
- Additional Information
- Configuration and Troubleshooting Tools
- Connecting on a LAN
- Connecting with Direct Dial
- Connecting to an ISP
- Using Security Technologies
- Configuration Files Used for Communication
- Glossary
- Index
Chapter 4 Connecting with Direct Dial
Using Direct Dial
Niagara Release 2.3
Niagara Networking & Connectivity Guide Revised: May 22, 2002
4–37
e. Click the TCP/IP Settings button.
Figure 4-27 Server tab settings.
Step 7
On the PPP TCP/IP Settings dialog box (Figure 4-28), verify the following settings,
then click OK:
• Server assigned IP address is selected. The PC will receive its IP address
from the remote host.
• Use IP header compression is checked.
• Use a default gateway on remote network is checked.
Figure 4-28 PPP TCP/IP settings.
You are returned to the New Phonebook Entry dialog box.