Specifications
Table Of Contents
- About This Document
- Understanding Networking and IP Addressing
- Introduction to Networking
- Networking using IP
- Niagara Considerations
- Additional Information
- Configuration and Troubleshooting Tools
- Connecting on a LAN
- Connecting with Direct Dial
- Connecting to an ISP
- Using Security Technologies
- Configuration Files Used for Communication
- Glossary
- Index
Chapter 4 Connecting with Direct Dial
Using Direct Dial
Niagara Release 2.3
Niagara Networking & Connectivity Guide Revised: May 22, 2002
4–35
Creating the
DUN
Connection
To create the DUN connection, proceed as follows.
Windows NT 4.0
Procedure 4-11 Creating a DUN phonebook entry.
Step 1
Double-click My Computer on the Windows NT 4.0 desktop.
Step 2
Double-click Dial-Up Networking.
Step 3
If you have not already done so, specify the local area code, dialing prefix for
accessing an outside line, and other modem properties in the Location Information
dialog box, and click Close.
Figure 4-24 Specifying location information for the DUN phonebook.
You are prompted to proceed (click OK) and you see the connection wizard.
Step 4
In the Phonebook Entry Wizard (Figure 4-25) do the following:
a. Type a name for the new phonebook entry.
b. Check I know all about phonebook entries.
c. Click Finish.