Specifications

Niagara Release 2.3
Revised: May 22, 2002 Niagara Networking & Connectivity Guide
Chapter 4 Connecting with Direct Dial
Configuring Direct Dial on the JACE-NP
4–18
Step 2 From the Windows NT 4.0 taskbar, open the Control Panel by choosing Start >
Settings > Control Panel.
Step 3 Double-click the Modems icon to open it.
Step 4 Click Add.
Step 5 In the Install New Modem dialog box, click the Don’t detect my modem box, and
click Next.
Step 6 If your modem manufacturer and model are listed (Figure 4-9), choose them from
the list and click Next. Otherwise, click Have Disk and do the following:
a. In the Install from Disk dialog box, click Browse (Figure 4-7).
Figure 4-7 Install From Disk dialog box.
b. Click OK on the error message about A:\ having been removed. The JACE-NP
does not have an A: drive.
c. In the Locate File dialog box (Figure 4-8), browse the network to locate the
modem driver (typically an .inf file), and click Open.
Figure 4-8 Locate File dialog box.