Specifications

Niagara Release 2.3
Revised: May 22, 2002 Niagara Networking & Connectivity Guide
Chapter 4 Connecting with Direct Dial
Configuring Direct Dial on the JACE-4/5
4–16
• updateNvRamFlag—change false to true if you have updated the initialization
string.
Step 4 From the file menu, choose File > Close.
If you made any changes, you are prompted to save them, otherwise the window
closes.
Step 5 If prompted to save your changes, click one of the following:
• Yes to save your changes. The file saves and the window closes.
• No to discard your changes. The window closes.
• Cancel to return to the editing window, then refer to Step 4.
Step 6 Reboot the JACE.
Enabling Dial-in Use the following steps to enable dial-in for any user who will connect to this host
via the modem.
Procedure 4-3 Enabling dial-in for users connecting to this host.
Step 1 Using the Admin Tool, open the JACE-4/5.
Step 2 Enable dial-in for any users who will be allowed to connect to this JACE via the
modem:
a. Click the Users tab.
b. Click any existing user.
c. Click Dialin Enabled. A check appears in the box (Figure 4-6).
d. Click Apply.
e. Repeat for any additional users.
Figure 4-6 User enabled for dial-in.