Instructions

Inaddition,mountallunitsinlocationswheretheyaresufcientlyprotectedagainstdampness
and rain.
Free-standing installation
Withthehelpofitsstandthatcanbefastened,thestationcanbeinstalledonanyatsurface.
Wall mounting
Choose a protected mounting location. Avoid direct rain or sunlight.
1. When mounting on a wall, remove the stand from the station
by unfastening.
2. Screw a suitable screw into the wall at the desired mounting
location and let the head stick out about 5 mm from the wall.
3. Hang the station on the screw. Make sure that the unit
engages securely on the screw head before letting go of it.
b) Placement of the outside temperature
transmitter
Thebracketcanbexedatbothendsofthe
outside transmitter so that it can be mounted
onanyatsurface.
The bracket can be mounted on a wall by
means of two screws provided.
1. For this, fasten the bracket with the help of
screws and dowels at the desired spot on
a vertical surface.
2. Fasten the outside transmitter into the
bracket.
31