User manual

47
 When the device isin theholiday mode,the settemperature is
maintained while in this mode. Program settings are only obtained
when the countdown of the holidaymode is at 0or the Holiday
Mode is reset to 0!
Heat/Cool control
Thedevicecanbeusedasatwo-pointcontrollerforcoolingorheatingsystems.
Wheninheatmode,thedeviceswitchesoffassoonasthetargettemperature
isexceededandincoolmodeassoonasthetargettemperatureisundercut.
Whenactive,theoperatingmodeisindicatedbyaameorsnowake.Alsoa
delayof5minutescanbeset.Thiscausesaswitchinghysteresisthatprotects
theconnectedsystemsfromrapidlychangingbetweenON(NO)andOFF(NC).
To make the setting, goto the function settings asdescribed under Holiday
mode.Usethebuttons“ “and“ “toselect“Ht“fortheheatingor“CL“for
thecoolingsystem.Press“OK”toconrm.
Pressandholdthe“SET”buttonfor3secondstoactivatethedelaytime.Use
“Select”tochangefromthetimesetting“ti”tothefunctionsetting“St”andcon-
rmwith“Set”.Use“Select”totogglebetweenholiday“Ho”andheat/cool“Ht”
andconrmwith“Set”.Use“Select”totogglebetweenheating“Ht”andcooling
“Cl”andconrmwith“Set”.Use“Select”totogglebetweendelay(d:ON)and
delay(d:oF).Saveandcloseyoursettingswith“OK”.