Operation Manual

58
e) Program overview
Withtheprogramoverview,youcanrecallandcheckprogramsalreadycong-
ured.
1. Pressandholdthe“PROG”buttonto
enter the program settings menu.
Press the “SELECT” button 4 times
until “7AY” is shown on the display.
2. Press the “PROG” button to set the
day for the overview. Use the “SE-
LECT” button to toggle betweenthe
days.
3. Bypressingthe“PROG”buttonagain,
youcancalluptheprogramoverview
fortheselectedday.Withthe“ “and
“ “ buttons to are able to control
each hour within the program.
4. To return to the program setting menu, press the “PROG” button again.
Thenpressthe“OK”buttontoreturntothedisplay.