Operation Manual

 When thedevice is inthe holiday mode, theset temperature is

maintained while in this mode. Program settings are only obtained

when the countdown of the holiday mode is at 0 or the Holiday

Mode is reset to 0!

Heat/Cool control

Thedevicecanbeusedtocontrolaheateroracooler.Inheatingmode,thether-

mostatswitchestheconnecteddeviceoffwhenthetargettemperatureisexceeded.

In cooling mode, the thermostat switches the connected device on when the

targettemperatureunderrun.

Theoperatingmodeisindicatedwiththeamesymbol(9:heatingmode)and

thesnowakesymbol(10:coolingmode).

Alsoadelayof5minutescanalsobeset.Thisisusedasswitchinghysteresisin

ordertoprotecttheconnecteddevicesfromtoofrequentswitching.

To make the setting,go tothe function settingsas describedunder Holiday

mode.Usethebuttons“

“and“ “toselect“Ht“fortheheatingor“CL“for

thecoolingsystem.Press“OK”toconrm.

Toenablethedelay,pressandholdthe„SET“buttonfor3seconds.

Use“SELECT”tochangefromthetimesetting“ti”tothefunctionsetting“St”

andconrmwith“SET”.