Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 1. Product & Company Identification Product: Solder, Lead free Manufacturer: Conrad Electronic SE Address: Klaus-Conrad-Str. 1, D-92240 Hirschau Telephone: +49 (0) 9604 / 40 - 8988 Date of issue: 08.07.2017 2. Hazards Identification 2.1. Classification of the substance or mixture Considered a hazardous mixture according to Reg. (EC) No 1272/2008 and their amendments.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet Precautionary statement(s) Storage Not Applicable Precautionary statement(s) Disposal P501 Dispose of contents/container in accordance with local regulations. 2.3. Other hazards Inhalation may produce health damage*. Cumulative effects may result following exposure*. REACh - Art.57-59: The mixture does not contain Substances of Very High Concern (SVHC) at the SDS print date. 3.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 4. First Aid Measures 4.1. Description of first aid measures a) General: If skin or hair contact occurs: Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation. In case of burns: Immediately apply cold water to burn either by immersion or wrapping with saturated clean cloth. DO NOT remove or cut away clothing over burnt areas.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet IF SWALLOWED, REFER FOR MEDICAL ATTENTION, WHERE POSSIBLE, WITHOUT DELAY. For advice, contact a Poisons Information Centre or a doctor. Urgent hospital treatment is likely to be needed. In the mean time, qualified first-aid personnel should treat the patient following observation and employing supportive measures as indicated by the patient's condition.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet c) Skin contact If skin or hair contact occurs: Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation. In case of burns: Immediately apply cold water to burn either by immersion or wrapping with saturated clean cloth. DO NOT remove or cut away clothing over burnt areas.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 4.2 Most important symptoms and effects, both acute and delayed See Section 11 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 5. Fire Fighting Measures 5.1. Extinguishing media DO NOT use halogenated fire extinguishing agents. Metal dust fires need to be smothered with sand, inert dry powders. DO NOT USE WATER, CO2 or FOAM. Use DRY sand, graphite powder, dry sodium chloride based extinguishers, G-1 or Met L-X to smother fire.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 6. Accidental Release Measures 6.1. Personal precautions, protective equipment and emergency procedures See section 8 6.2. Environmental precautions See section 12 6.3. Methods and material for containment and cleaning up Minor Spills Remove all ignition sources. Clean up all spills immediately. Avoid contact with skin and eyes. Control personal contact with the substance, by using protective equipment.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 7. Handling and Storage 7.1. Precautions for safe handling Safe handling Develop work practices and procedures that prevent particulate from coming in contact with worker skin, hair, or personal clothing. If work practices and/or procedures are ineffective in controlling airborne exposure or visual particulate from deposition on skin, hair, or clothing, provide appropriate cleaning/washing facilities.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet The activity or electromotive series of metals is a listing of the metals in decreasing order of their reactivity with hydrogen-ion sources such as water and acids. In the reaction with a hydrogen-ion source, the metal is oxidised to a metal ion, and the hydrogen ion is reduced to H2. The ordering of the activity series can be related to the standard reduction potential of a metal cation.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet Ingredient Original IDLH Revised IDLH tin Unknown mg/m3 / 400 mg/m3 / Unknown ppm 25 mg/m3 / 100 mg/m3 copper N.E. mg/m3 / N.E. ppm 100 mg/m3 8.2. Exposure controls 8.2.1. Appropriate engineering controls Metal dusts must be collected at the source of generation as they are potentially explosive. Avoid ignition sources. Good housekeeping practices must be maintained.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet Body protection See Other protection below Other protection Overalls. P.V.C. apron. Barrier cream. Thermal hazards Not Available Respiratory protection Particulate.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 9. Physical and Chemical Properties 9.1. Information on basic physical and chemical properties Appearance Massive form of the metal. Massive or bulk metals (as opposed to dispersed or divided metals) are characterised by having a well-ordered infinite lattice of metal atoms. Massive metals exist in various forms, including sheets, rods, ingots, foils, pellets, wire or on occasion, dusts.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 10. Stability and Reactivity 10.1.Reactivity See section 7.2 10.2. Chemical stability Unstable in the presence of incompatible materials. Product is considered stable. Hazardous polymerisation will not occur. 10.3. Possibility of hazardous reactions See section 7.2 10.4. Conditions to avoid See section 7.2 10.5. Incompatible materials See section 7.2 10.6. Hazardous decomposition products See section 5.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 11. Toxicological Information 11.1. Information on toxicological effects a) Inhaled The material is not thought to produce either adverse health effects or irritation of the respiratory tract following inhalation (as classified by EC Directives using animal models).
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet e) Chronic Long-term exposure to the product is not thought to produce chronic effects adverse to the health (as classified by EC Directives using animal models); nevertheless exposure by all routes should be minimised as a matter of course. Metallic dusts generated by the industrial process give rise to a number of potential health problems.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 12. Ecological Information 12.1. Toxicity Ingredient Endpoint Test Duration (hr) Species Value Source tin LC50 96 Fish >0.0124mg/L 2 tin EC50 48 Crustacea 0.00018mg/L 5 tin EC50 72 Algae or other aquatic plants >0.0192mg/L 2 tin EC50 72 Algae or other aquatic plants >0.0192mg/L 2 tin NOEC 168 Crustacea <0.005mg/L 2 copper LC50 96 Fish 0.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet Aquatic/Terrestrial Fate: When released to dry soil, most metals will exhibit limited mobility and remain in the upper layer; some will leach locally into ground water and/ or surface water ecosystems when soaked by rain or melt ice. A metal ion is considered infinitely persistent because it cannot degrade further.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 13. Disposal Considerations 13.1. Waste treatment methods Product / Packaging disposal Recycle wherever possible or consult manufacturer for recycling options. Consult State Land Waste Management Authority for disposal.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 14. Transport Information Labels Required Marine Pollutant No HAZCHEM Not Applicable Land transport (ADR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS 14.1.UN number Not Applicable 14.2.UN proper shipping name Not Applicable 14.3. Transport hazard class(es) Class Not Applicable Subrisk Not Applicable 14.4.Packing group Not Applicable 14.5.Environmental hazard Not Applicable 14.6.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet Air transport (ICAO-IATA / DGR): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS 14.1. UN number Not Applicable 14.2. UN proper shipping name Not Applicable 14.3. Transport hazard class(es) ICAO/IATA Class Not Applicable ICAO / IATA Subrisk Not Applicable ERG Code Not Applicable 14.4. Packing group Not Applicable 14.5. Environmental hazard Not Applicable 14.6.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet Sea transport (IMDG-Code / GGVSee): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS 14.1. UN number Not Applicable 14.2. UN proper shipping name Not Applicable 14.3. Transport hazard class(es) IMDG Class Not Applicable IMDG Subrik Not Applicable 14.4. Packing group Not Applicable 14.5. Environmental hazard Not Applicable 14.6.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet Inland waterways transport (ADN): NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS 14.1. UN number Not Applicable 14.2. UN proper shipping name Not Applicable 14.3. Transport hazard class(es) Not Applicable 14.4. Packing group Not Applicable 14.5. Environmental hazard Not Applicable 14.6.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 15. Regulatory Information 15.1.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1516976 Material Safety Data Sheet 16. Other Information Full text Risk and Hazard codes H228 Flammable solid. H260 In contact with water releases flammable gases which may ignite spontaneously. H300 Fatal if swallowed. H302 Harmful if swallowed. H311 Toxic in contact with skin. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H330 Fatal if inhaled. H331 Toxic if inhaled.
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.