User manual

ManualsBrandsBASETECH ManualsVirtual RealityHeadmount Google 3D VR Brown VR glasses

b) Product-specic

• Fire hazard! Improper use can cause the lenses to act as a burning glass, resulting

in the concentration of sunrays on a very small point and in the generation of very

high temperatures.

• Do not use the product to view bright light sources, especially the sun. Viewing

unltered sunlight for even a split second can cause permanent loss of sight.

• The product uses magnetic energy. If you wear a pacemaker, consult a physician

before use with regard to potential dangers.

• If you are feeling unwell during use, remove the product immediately.

• Keep your area of movement free of objects, to avoid accidents.

Operation

1. Remove the glasses from the pull-out box.

2. Attach the headband according to the pictured steps below.

3. Open the webpage http://www.google.com/cardboard in a browser, or scan the QR code

shown on the product to download the app to your smartphone.

4. Open the VR app on your smartphone.

5. Open the front cover, and put your mobile device (screen facing towards lenses) inside.

Please pay attention to the illustrations below.

- Make sure your mobile device is positioned properly. It must be centred.

The front cover must be closed securely after installation.

6. Follow the instructions of the app.

Care and cleaning

• Use a dry, lint-free cloth to clean the product.

• For protection, slide the product into the pull-out box after use.

Disposal

Dispose of the product according to legal regulations. You thus full your statutory

obligations and contribute to the protection of the environment.

Technical data

Lens .............................................. ø 37 mm

Compatible display sizes .............. 3.7” – 6” (9.4 cm – 15.2 cm)

Dimensions (W x H x D) ............... 145 x 87 x 87 mm (installed)

Weight .......................................... 140 g

Operating instructions

Head-mounted Google 3D VR glasses for smartphone V2

Item no. 1407623

Intended use

With the 3D VR glasses, you can play 3D VR contents of compatible apps. Use the magnetic

button for control via magnetometer of your smartphone. The QR code imprinted on the

glasses refers to compatible apps.

For safety and approval purposes, you must not rebuild and/or modify this product. Using the

product for purposes other than those described above may damage the product. In addition,

improper use may create safety hazards. Read the instructions carefully and store them

in a safe place. Make this product available to third parties only together with its operating

instructions.

This product complies with statutory national and European regulations. All company and

Package contents

• Glasses

• Headband

• Pull-out box

• Operating instructions

Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code

on this page. Follow the instructions on the website.

Explanation of symbols

This symbol is used to highlight important information in these operating instructions.

Always read this information carefully.

This symbol indicates special information and advice on how to use the product.

Safety instructions

Read the operating instructions carefully and especially observe the safety

information. If you do not follow the safety instructions and information on

proper handling in this manual, we assume no liability for any resulting

personal injury or damage to property. Such cases will invalidate the warranty/

guarantee.

a) General information

• This product is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become

dangerous playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high

humidity, moisture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, stop using it and prevent

unauthorized use. Safe operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stress.

• Always handle the product carefully. Jolts, impacts or a fall even from a low height

may damage the product.

• Always observe the safety and operating instructions of any other devices used

with this product.

• Consult a technician if you are not sure how to use or connect the product.

• Maintenance, modications and repairs must be done by a technician or an

authorized repair centre.

• If you have questions which remain unanswered by these operating instructions,

contact our technical support service or other technical personnel.

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represents the technical status at the time of printing.