User manual

22
Off = Press down right side
On = Press down left side
The indicator lamp lights up when the product is heating up.
• Turn the thermostat regulator fully to the right to position MAX. The product starts to heat up.
• As soon as the desired room temperature is reached, turn the thermostat regulator slowly to the left until you hear
a click and the indicator lamp goes out.
• If the room temperature drops, the product heats up automatically until the desired room temperature is reached
again.
11. Overheat protection
The device switches off automatically in case of overheating. You may use the product again after it has cooled down
sufciently.
12. Troubleshooting
Ifthedeviceisnotworkingproperly,rstchecktoseeifthereisoneofthefollowingissues.
Problem Cause Suggested resolution
The device does not switch on.
No power to the mains socket
available or main fuse defective.
Checkthepowersupplyandmain
fuse.
Plug has not been fully inserted.
Fully insert the power plug into the
mains socket.
Both heating level switches are
located in the OFF position.
Turn on the product by pressing
down the left part of the respective
heating level switch.
The room temperature is above the
temperature set on the thermostat.
Normal operation. Device
automatically turns on and heats up
as soon as the temperature drops
below the set value.
The device has been covered. The
thermal overheat protection was
activated.
Never cover the device with
blankets, fabrics or other objects.
Allow the device to cool down
sufcientlybeforecontinueduse.