User manual

• Attach the two remaining wall brackets to the bottom of the product using one short screw each.

MAX

MIN

• Align the slots on the back of the product to the wall brackets. Hang the product on the wall. The housing back panel

must slide into the notches in the wall brackets.

• Mark the location of both drill holes on the wall through the lower wall brackets.

• Removetheproductfromthewall.

• Drill the holes in the wall and insert the wall anchors.

• Hang the product back on the wall.

• Fasten the bottom wall brackets to the wall with one long screw each.

10. Operation

• Make sure that the product is turned off. For both heating level switches, the side with the indicator lamp must be

pushed down.

• Connectthemainsplugtoastandardmainssocket.

• Turn the product on by pressing down the left side of the respective heating level switch.

Lower switch Upper switch

Switched off Off Off

Low level (750 W) On Off

Medium level (1250 W) Off On

High level (2000 W) On On