User manual

b) Wall installation

When drilling holes and tightening the screws make sure not to damage any power lines or gas or water

pipes below the surface.

 Thedistancetotheoormustbeatleast40cm.

 Removethefeetifpreviouslyinstalled.

2 pairs of wall brackets are included. In most cases, it makes no difference which pair is attached above

and which below. If problems occur during installation due to special conditions, swap the pairs.

Pair A Pair B

• Mark the location of the two holes for the wall bracket pair the product will be hanged in later. The drill holes should

lie on a horizontal line. The distance between the two holes must be exactly 51 cm.

• Drill the holes in the wall and insert the wall anchors.

• Attach the wall brackets to the wall using the long screws.