Instructions

Error Possible cause Solution
The parking aid does not
switch on.
The reverse gear is not
engaged.
Engage the reverse gear
No ignition voltage. Switch the ignition on.
Wrong cabling.
The fuse is defect.
Checktheplugconnections
and the at fuse of the
voltage supply.
The lateral slider is in the
“OFF” position.
Put the slider on “ON, Lo
or Hi”.
The display shows wrong
distance values and a signal
sounds although there is
enough room.
Program error Disengage the reverse gear
and engage it again (reset).
The sensors are very dirty. Cleanthesensorsregularly
 Repairs other than those described should only be carried out by an authorised
specialist.
It is forbidden to dispose of it in the domestic waste!
9. Care and Cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
• Disconnect the product from the mains before each cleaning.
• Cleantheoutersensorsregularlytoavoidmalfunctioning.Cleanthedisplaywithaclean,
damp and lint-free cloth without abrasive of chemical cleaners.
27