Certifications 2

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 1998435
Material Safety Data Sheet
Regulatory information
WEL (Great Britain): EH40/2018
AGW (Germany): TRGS 900
VME (France): ED 984, 10.2016
MAK (Germany): MAK- und BAT-Liste
IOELV (EU): (EU) 2017/164
DNELs: Not available
PNECs: Not available
Ingredients with biological limit values:
7439-96-5 manganese
BGW (Germany) 20 μ g/l
Untersuchungsmaterial: Vollblut
Probennahmezeitpunkt: bei Langzeitexposition: am Schichtende nach mehreren vorangegangenen
Schichten, Expositionsende bzw. Schichtende
Parameter: Mangan·
Additional information:
The lists valid during the making were used as basis.
8.2 Exposure controls
Based on the composition shown in Section 3, the following measures are suggested for occupational safety measure.
Appropriate engineering controls:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
See Section 7 for information about design of technical facilities.
Personal protective equipment
Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposureuse self-contained
respiratory protective device.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical
mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Page 8 of 18