Instructions

• If you have any questions which are not answered in these operating instructions,
contact our technical support service or other technical personnel.
b) Electrical safety
• Before connecting the product to the mains, check that your local A/C mains
voltage matches the specications on the nameplate.
• This product is built according to protection class I. It must only be connected to
an earthed mains socket.
• Never pour liquids over electrical devices or place objects lled with liquid next to
the device. If liquid or an object gets into the device, power down the respective
mains socket (e.g. switch off the circuit breaker), and then pull the mains plug
from the mains socket. Discontinue use and take the product to a specialist repair
centre.
• Never use the product immediately after it has been brought from a cold room into
a warm one. This may cause condensation to form, which can destroy the product.
Allow the product to reach room temperature before connecting it and putting it to
use. This may take several hours.
• The mains outlet must be located near to the device and be easily accessible.
• Never unplug the mains plug by pulling on the cable. Always use the grips on
the plug.
• Unplug the mains plug from the mains socket if you do not plan to use the
appliance for an extended period of time.
• For safety reasons, disconnect the mains plug from the mains socket during
thunderstorms.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or subjected to mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable, as this may
damage the components inside the cable. Damaged mains cables can cause a
fatal electric shock.
• Do not touch the mains cable if there are any signs of damage. Power down the
respective mains socket (e.g. via the respective circuit breaker), and then carefully
unplug the mains plug from the mains socket. Never use the product if the mains
cable is damaged.
• Damaged mains cables must be replaced by the manufacturer, an authorised
repair centre or a qualied electrician.
• Never insert or unplug the mains plug when your hands are wet.
• Each socket on the power strip features a child safety lock. In order to unlock a
socket, the pins of a plug must be inserted into both of the socket openings at
the same time. Nevertheless, you should still exercise particular caution in the
presence of children. Children do not understand the hazards associated with the
incorrect use of electrical devices. There is a risk of a fatal electric shock!
• Do not overload the power strip. Pay attention to the maximum total power
consumption of all connected devices in the "Technical data" section.
• Insert the mains plug on the power strip into a wall socket.
• Do not connect the product in series! Do not connect any other power strips or
power distribution devices to the product. This can lead to an overload and cause
a re!
• Do not cover the power strip during use! The power strip and the connection cable
will become warm when there is a high connected load. This constitutes a re
hazard!
• The power strip is only voltage-free when the mains plug is disconnected!
• Only use the product in dry rooms.
• Only use the product in temperate climates. It is not suitable for use in tropical
climates.
Setup and installation
• You can place the power strip on a level surface.
Ensure that the on/off button is unobstructed and easily accessible. In addition,
ensure that it will not be touched unintentionally in the event that pressure is applied
to the top of the power strip.
• Turn the hinges on the power strip to the desired position. You can adjust the position of
the hinges to suit the location, e.g. to position the sockets around furniture or household
appliances.
• Before using the power strip, completely unwind the mains cable and ensure that there are
no loops.
• Place the product in a suitable location. Lay the cable such that nobody will trip over it. Use
suitable padding to protect valuable surfaces against scratches.
If you wish to control the power strip with the mobile app, ensure that the power strip
is placed in a location with good Wi-Fi reception.
After pairing the power strip with your mobile device, you can plug the power strip
into another mains socket without repeating the pairing process.
Operating Instructions
Wi-Fi 3-way power strip
Item no. 1911220
Intended use
This power strip features three earthed sockets that can be connected to mains appliances. All
of the sockets can be turned on or off together using the on/off button, which features a built-in
light. The power strip can also be controlled via a mobile app. The connection specications
and the maximum total power consumption of all connected devices are listed in the "Technical
data" section.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, re or electric shock. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Power strip
• Operating instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
sExplanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
The product must only be installed and used in dry, indoor locations. It must not
become damp or wet, as this may cause a fatal electric shock!
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in
these operating instructions, we will assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety instructions and operating instructions of any other
devices which are connected to the product.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modications and repairs must be carried out by a technician or a
specialist repair centre.