Instructions

e) Webcam Function
An SD card must be inserted for the webcam function
to work.
• Connect the device to a USB port on your computer via the
USB connector (7).
• The device will appear as a removable disk, when this
happens press the ON/OFF button (3) once.
• The removable disk will disappear and the device can now be
used as a webcam.
f) Resetting the Device
If the device does not respond correctly try resetting it by pressing
the ON/OFF (3) button to turn the camera off then on again.
Refer to section 9. a) “Power ON (Standby Mode) / OFF” for
information about how to do this.
g) Replace the Ink Cartridge
• Unscrew the bottom half of the pen from the as shown in
“Operating Elements”.
• Use a plus head screwdriver to unscrew the ink cartridge (8).
• Tilt the device upside down to remove the spent ink cartridge.
• Replace with a new cartridge then screw it back in.
35