Instructions

11.1 Output 1

• Open the door via ID card (introducing the ID card)

• Open the door with the user code (enter the user code)

• Open the door by introducing the ID card and entering the user number. (Introduce the ID

card, the green LED blinks - now you have to enter the user number within 10 seconds.)

While the green LED (5) blinks, you can also return to normal operating mode /

standby mode by pressing the key “ ”.

11.2 Output 2

In this case, operation takes place with the user code. Output 2 is activated by entering the

user code.

Output 1 and 2 can be operated in any case with the programming code! Proceed as follows:

• Operating output 1:

Enter the programming code --- “#” --- “1” (manual code input).

Enter the programming code --- “1” (automatic code input)

• Operating output 2:

Enter the programming code --- “#” --- “2” (manual code input)

Enter the programming code --- “2” (automatic code input)

12. Security functions

• After3 to 10 wrong entries (can be dened at wish), the system blocks automatically or

triggers the alarm.

• If the door is forced open, the system triggers the alarm immediately.

• Ifthedoorisleftopenlongerthandenedinthedefaultsettingsforthedooropeningtimes,

the alarm sounds to remind you to close the door.

• If the tamper switch is activated, the system emits the following warning signals:

The yellow LED blinks and the buzzer sounds continuously. By deactivating the tamper

switch, the acoustic and optical warning signals are stopped. The tamper switch can also be

connected to a security system.