Instructions

10.8 Programming the opening time (output 2)
• Press the keys “6” --- “0” --- (“01” – “99” seconds) --- “#”
Output 2: Relay opens between 1 and 99 seconds.
• Press the keys “6” --- “1” --- “#”
Output 2: is locked
Factory setting = short-time mode: 3 seconds!
10.9 Programming the functions
User code (input mode)
• Press the buttons “7” --- “0” --- “0” --- “#”
Manualinputmode---Pressthe“number”key“#”---Enteredusercodeisconrmed=code
input must always be completed by pressing the “#” key!
• Press the buttons “7” --- “0” --- “1” --- “#”
Automatic input mode --- The user code must be just as long as the programming code!
Inthiscase,youdonothavetopressthe“number”key“#”toconrmtheenteredusercode.
Factory setting = manual code input
Output relay – Signal sounds when the relay is triggered
• Press the buttons “7” --- “1” --- “0” --- “#”
The signal tone is deactivated.
• Press the buttons “7” --- “1” --- “1” --- “#”
The buzzer sounds for 1 second. The output relay is activated.
Factory setting = announcement is deactivated!
Key sound
• Press the buttons “7” --- “2” --- “0” --- “#”
This suppresses the key sound and deactivates it during operation.
• Press the buttons “7” --- “2” --- “1” --- “#”
This activates the key sound, which is then audible during operation.
Factory setting = key sound is activated!
40