Instructions

Block mode (does not
react to card / code
inputs)
1 x blink in
10 seconds
interval
1 short beep
in 10 seconds
interval
1 long beep
end of the
blocking
Programming mode Lit Lit
During programming Lit Permanent
blinking
Conrmation of the
programming (press
key “#”)
Lit Lit 2 beeps
Alarm status Permanent
blinking
Permanent
beep
10. Programming
Priortocommissioningyournewcodelock,yoursthavetoprogramitandchangethefactory
code.
The default factory code is:
1 2 3 4
Calling up the programming mode:
Input: “ ” --- “Master code” --- “#”
(yellow LED (4) and green LED (5) lit)
Exiting the programming mode:
Input: Press button “ ” once
(yellow LED (4) blinks in 2-second intervals)
Successful programming:
yellow LED (4) blinks 2 x and the buzzer sounds 2 x
Wrong programming:
yellow LED (4) blinks 5 x and the buzzer sounds 5 x
36