Instructions

h) OUTPUT 1 = Output 1
Output 1 (connection of an automatic opener)
i) EXT. CARD READER
Connection of an external card reader. (Please observe the operating instructions of the
card reader!)
j) KEY ACT
Connection of external siren (piezo), or light, or relay.
k) ALM OUT
Connection of a siren or revolving light. (Ground contact)
l) DOOR SENS / GND
Connection of magnetic contact
m) OUTPUT 2= Output 2
Output 2 (connection of an automatic door opener)
9. Acoustical and optical indicators
Explanation of the
acoustical and optic
display
Status
Display
Yellow LED
Output 1
Green LED
Output 2
Red LED
Acoustic
Display
Buzzer
White LED
Standby operation
(usual operating
mode)
1 x blinking
in 2 sec.
Intervals
Successful key input 1 x blinking,
then lit
10 seconds
1 beep lit for 10
seconds
Successful card /
code input
2 x blinks Lit 2 beeps
Successful operation 2 x blinks 2 beeps
Successful code 2
input
2 x blinks Lit 2 beeps
Wrong card / code
input
5 x blinks 5 beeps
Wrong operation 5 x blinks 5 beeps
35