Instructions
Safety instructions
Please read the operating instructions carefully and pay particular
attention to the safety instructions. We do not assume liability for
any injuries/material damages resulting from failure to observe the
safety instructions and the information in these operating instruc-
tions regarding the proper use of the product. Furthermore, in
such cases, the warranty/guarantee will be null and void.
Attention, important note!
Only persons with relevant electro-technical knowledge and expe-
rience should carry out the installation! *)
If it is not installed properly, you risk:
• your own life
• the life of the person using the electrical system.
If it is not installed properly, you risk severe damage to property, e.g.,
by re.
There is a risk of you being held liable for personal injury and material
damage.
Contact an Electrician!
*) Specialist knowledge required for the installation:
In particular, the following expertise is required for installation:
• the applicable „5 safety rules“: Switch off power; secure against
switching back on; determine voltage-free status; earthing and short-
circuiting; cover or fence off nearby live parts
• Choose appropriate tools, meters and, if necessary, personal protec-
tive equipment
• Evaluation of the measurement results
• Selection of the electrical installation material to ensure the shutdown
conditions
• IP protection types
• Installation of the electrical installation material
• Type of mains supply network (TN system, IT system, TT system) and
the connection conditions that follow from them (classical earthing,
protective earthing, required additional measures, etc.)
If you do not have the expertise required for the installation, do
not connect and install it yourself, but ask a qualied technician.
a) General
• Maintenance, adjustment or repair work may only be carried out by
an expert/authorised service centre familiar with the hazards involved
and the relevant regulations.
• The product is not a toy and should be kept out of the reach of chil-
dren! There is danger of a life-threatening electric shock! Install the
product out of the reach of children.
• Protect the product from extreme temperatures, direct sunlight, strong
vibrations, high humidity, moisture, combustible gases, vapours and
solvents.
• Handle the product with care; it can be damaged by impacts, blows or
falls even from a low height.
• Do not leave the packaging material lying around carelessly as it may
be a danger to children.
• On industrial sites, the accident prevention regulations of the asso-
ciation of the industrial workers‘ society for electrical equipment and
utilities must be followed!
• Consult a qualied technician, if you are not sure how to operate or
how to safely connect the equipment.
Operating instructions
Top hat rail power supply
Item no. 1599558 (output voltage 12 V/DC, 1.25 A)
Item no. 1628895 (output voltage 24 V/DC, 0.63 A)
Item no. 1698263 (output voltage 12 V/DC, 2.5 A)
Item no. 1698262 (output voltage 24 V/DC, 1.25 A)
Item no. 1698265 (output voltage 12 V/DC, 5 A)
Item no. 1698264 (output voltage 24 V/DC, 2.5 A)
Introduction
The product is used as power supply for suitable components (for output voltage/
current, see chapter “Technical data”). It is installed on a commercially available
DIN rail according to EN 55022.
For safety and compliance reasons, the product must not be converted or modied
in any way. If you use the product for other purposes than those described above,
the product may be damaged. Furthermore, an improper use involves risks such
as short-circuits, re, electric shocks, etc. Please read the operating instructions
carefully and do not discard them. If you pass the product on to a third party, please
include the operating instructions.
This product complies with the applicable national and European regulations. All
names of companies and products are the trademarks of the respective owners.
All rights reserved.
Package contents
• Top hat rail power supply
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads
or scan the QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside of a triangle is used when there is a poten-
tial risk of personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in
these operating instructions which absolutely have to be observed.
The arrow symbol indicates specic tips and advice on operation.
The product is designed according to protection Class II (reinforced or
double insulation, protective insulation).